Unpopular opinion: a $3 bag of zip ties saved my sanity on a Garmin G1000 install
Last month I was chasing an intermittent bus error on a G1000 upgrade in a King Air and the fault kept moving every time I wiggled a connector, which made zero sense to me at the time (of course it turned out the harness was just draping across a heat duct). I ended up taping off a rough bundle map with painter's tape and zip ties before I touched a single pin, and the fault finally stayed put long enough for me to find one chafed wire at station 234. My lead laughed at the tape map until the next squawk showed up and he asked to borrow it. Anyone else keep a cheap bundle map trick like this, or am I just slow to the party on it?