I spent 4 years chasing wiring gremlins before a guy at the Van Nuys hangar asked me one dumb question
I used to believe the shop rule that you always chase a fault from the LRU outward, one connector at a time, and I defended that method for a long time. Then last spring I had a nav radio that kept dropping out on the ground but never in the air, and I burned almost two full shifts probing pins and ringing out a harness that turned out fine. A guy named Ray who has been on the floor since the 80s walked over, looked at my meter, and asked if I had ever checked the ground return before the signal side. I had not. Not once in 4 years. The bonding strap at the rack had corrosion hiding under the paint right at the bolt, and cleaning it up took maybe 15 minutes. I still feel dumb about the hours I lost. My point is that jumping straight to the signal path is backwards more often than people want to admit, and the old habit of starting at the box is what keeps us chasing our tails. Curious if other shops actually teach ground checks first or if that is just a Ray thing.