Showerthought: swapping to a heated pitot probe tester saved us from chasing a ghost fault
Had an intermittent air data fault on a King Air that kept logging only on cold mornings at our Grand Rapids hangar. Instead of tearing into the wing harness again, I borrowed a heated pitot tester from the calibration shop and ran the probe on the bench for 20 minutes. It dropped out around the 12 minute mark every time, which turned out to be a bad heater element, not the wiring we kept blaming. Two other techs had already dug through that same harness twice, so now I test the probe first before touching a single connector. Anyone got a better order of operations for sorting air data gremlins?